Current Location:Home >> Subracks Word >> RXB
Products Content

RXB components


 

Front Flange


 

 

 

 

Rack-mounted Flange
●Used for the installation of rack-mounted subracks
●Without handle hole
●With integrated slot for the installation of EMC shrapnel
Material: aluminium magnesium alloy extrusion 6063 A
Surface treatment: chromium acid passivation, anodic oxidation

 

 

U RXB
     
     
     
     
     
     
     
     
     

 

+Accessories :


EMC (battery compatible) shielding shrapnel, vertical.

 


 
 

Handle More
●For component box
●Can be installed on the flange with the ?handle holes
●Fixed hole M4
Material: zinc alloy precision castings

Surface treatment: spray paint silver-gray color
用于 RXB
     
     

 

 

 

 

 

 

Filling flange
●fill the gap without the rack-mounted flange
●With integrated slot for the installation of ?EMC shrapnel
Material: aluminium magnesium alloy extrusion 6063 A
Surface treatment: chromium acid passivation, anodic oxidation

 

 

U RXB
     
     
     
     
     
     
     
     
     

 

+Accessories :


EMC (battery compatible) shielding shrapnel, vertical.
 

 

Horizontal beam


 

 

 

Front horizontal beams
●Used for guide rail installation and panel fixation.. ●Surpass the specified height 2.5 mm in the front
, comply with IEC 60 297-3
●interval hole used to install the plug-in guide with accurate TE interval
●Positive threaded hole M4
●Throughout hollow hole
●Horizontal beam 168 TE, not processed face suitable for custom cutting length
Material: aluminium magnesium alloy extrusion

Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Anodic oxidation, chromium acid passivation
Includes 2 M4X12 fixed screw

 

 

+ Accessories :


One thread plate


In addition to:


M4X12 screw.   【Please see fasteners
 

 

 

 

Rear horizontal beams
●Used for plug-in board guide rail installation and Z-form profiles, insulation or contact belt fixation.
●1 TE interval for thread drilling hole M2.5
●interval hole used to install the plug-in guide with accurate HP interval
●Thread M2.5 used for ?installation of Z form profiles, insulation or contact belt
●Positive thread M4
●The throughout hollow hole
●Horizontal beam 168 TE, not processed face suitable for custom cutting length
Material: aluminium magnesium alloy extrusion

Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Anodic oxidation, chromium acid passivation
Includes 2 M4X12 fixed screw.

 

In addition to:


M4X12 screw  【Please see fasteners
 

 

 

 

Rear horizontal H beams
●Used for plug-in board guide rail installation and Z-form profiles, insulation or contact belt fixation.
●interval hole used to install the plug-in guide with accurate HP interval
●Installed bus board/Z form profiles, also requires additional thread board
●Positive thread M4
●The throughout hollow hole
●Horizontal beam 168 TE, not processed face suitable for custom cutting length
Material: aluminium magnesium alloy extrusion
Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Anodic oxidation, chromium acid passivation
Includes 2 M4X12 fixed screw

 

+ Accessories :


one thread plate


In addition to:


M4X12 screw   【Please see fasteners
 

 

 

 

Front horizontal extension beam
● Used for type plug pulled/booster
● Used for plug-in board guide rail installation and 
   panel fixation
● Surpass the specified height in front and hole array according to IEEE 1101.10 and IEC 60 297-5-10 1, used for V type plug ejector
●interval hole used to install the plug-in guide with accurate TE interval
●Positive thread M4
●The throughout hollow hole
Material: aluminium magnesium alloy extrusion

Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Anodic oxidation, chromium acid passivation
Includes 2 M4X12 fixed screw

 

 

+ Accessories :


One thread plate

 

In addition to:


M4X12 screw   【Please see fasteners
 

 

 

 

 Strengthen the front beam
●Used for plug-in board guide rail installation and panel fixation, integrate rear horizontal beam profiles, even in the condition of high load, double screws can ensure the stability.
●The interval hole hole array is used to TE interval precise installation guide plugin panel
●Positive thread M4
●The throughout hollow hole
●Horizontal beam 168 TE, not processed face suitable for custom cutting length
Material: aluminium magnesium alloy extrusion
Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Anodic oxidation, chromium acid passivation
Includes 4 M4X12 fixed screw

 


+ Accessories :


One thread plate

In addition to:


M4X12 screw   【Please see fasteners
 

 

 

 

Rear level T Angle beam
●Used for plug-in board guide rail installation and integrated with Z form profiles, for the installation of connector
●interval hole used to install the plug-in guide with accurate TE interval
●Positive thread M4
●The throughout hollow hole
Material: aluminium magnesium alloy extrusion
Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Includes 2 M4X12 fixed screw

 

In addition to:


M4X12 screw   【Please see fasteners
 

 

 

 

Rear horizontal middle beam
●In the use of 6 U circuit board or plug-in module box, install the Z form profiles, insulation or contact belt
●84 thread drilling hole M2.5
●Positive thread M4
●The throughout hollow hole
Material: aluminium magnesium alloy extrusion
Surface treatment: chromium acid passivation,

 

 

TE RXB
42    
63    
84    

Chromium passivation acid
Includes 2 M4X12 fixed screw

 

In addition to:


M4X12 screw   【Please see fasteners
 

 

 

 

Rear horizontal new middle beam
●In the use of 6 U circuit board or plug-in module box, install the Z form profiles, insulation or contact belt, also requires additional thread board
●Positive thread M4
●The throughout hollow hole
Material: aluminium magnesium alloy extrusion
Surface treatment: chromium acid passivation, anodic oxidation

 

 

TE RXB
42    
63    
84    

Anodic oxidation, chromium acid passivation
Includes 2 M4X12 fixed screw

 

+ Accessories :


Two threaded plate

In addition to:


M4X12 screw   【Please see fasteners
 

 

 

Z beam
●install the connector
●84 thread drilling M2.5
Material: aluminium magnesium alloy extrusion

Surface treatment: chromium acid passivation, anodic oxidation

 

 

 

TE RXB
42    
63    
84    
Anodic oxidation, chromium acid passivation
 

 

Guide


 
 

The plug-in board guide plastic (RX-B)
●For installation and collaborations of the plug-in panel, and contact spring installatrion
●"For 160, 220, 280 (mm) circuit board, the biggest to 2mm Specific thickness
●environment temperature: 45 ℃ ~ 75 ℃, flame retardant level: ?2

●Material: strengthened polycarbonate + spun glass
TE RXB
42    
63    
84    

 

+Accessories:


Contact spring
 

 
 

The plug-in board
guide combination (RX-B)

●Rated 1.6 mm circuit board,
●combined three section guide? middle aluminum + two extreme pieces
●The middle aluminum can be cut by customized definition

Material: aluminum + polycarbonate
TE RXB
42    
63    
84    

 

+ Accessories:


Contact spring
 

 
 

Coded plug-in guide plastic
● Coded plug-in board guide 4 TE
●For 1.6 mm to 2.0 mm rated thickness
●Code room for coding pin installation
●The electrostatic discharge card feet is installed for the static load discharge
●Using different color for slot signs
Environmental temperature: 45 ℃ ~ 75 ℃, the combustion level: level 2

Material: strengthenedpolycarbonate + spun glas

 Note: only be used together with type V plug/pull booster 

+ Accessories:


1), coding pin
2), electrostatic discharge card feet

3), ground shrapnel
 
  RXB
  红色 绿色 黄色 灰白色  
160          
220          
 

 
 

Coded plug-in guide combination
●combined three section guide? middle aluminum + two extreme pieces
●For 1.6 mm to 2.0 mm rated thickness
The middle aluminum can be cut by definition
Material: aluminum + polycarbonate

Note: only be used together with type V plug/pull booster
TE RXB
42    
63    
84    

 

 

+ Accessories:


1), coding pin
2), electrostatic discharge card feet

3), ground shrapnel
 

 

Cover plate


 
 

Ventilation cover plate
●Used to cover the enclosure in up and down directions
●Fixed holes array with 10 mm intervals
●Material: 5052 aluminium magnesium alloy board 1 mm, (optional steel plate)
Surface treatment: anodic oxidation, chromium acid passivation

 


Accessories:


Cover fittings

对应侧板深度

mm

RXB
     
     
     
     
     
     
     
     
 

 
 

Block cover plate
●Used to cover the enclosure in up and down directions
●Fixed holes array with 10 mm intervals
Material: 5052 light alloy steel plate or selection of 1.0 mm
Surface treatment: anodic oxidation, chromium acid passivation

 

Accessories:


Cover fittings

对应侧板深度

mm

RXB
   
   
   
   
   
   
   
     
 

 

Side panel


 

 

RX-B type
Used to support the enclosure structure and to build enclosure
subject with horizontal beam .
● fixed 10mm intervals in the array for installation of horizontal
   beams
● positioning convex platform height: 1mm
Material: 5052 light alloy plate 2.5 mm

Surface treatment: anodic oxidation, chromium acid of meal
 
 
T(mm)

t(mm)

2U 3U 4U 5U

6U

             
             
             
             
             
             
             
             
             
             
             
 
 
 

Panel    【更多


 
Material: aluminium magnesium alloy 6063 A-T5

Height: 1 U, 2 U, 3 U, 4 U, 5 U, 6 U, 7 U, 8 U, 9 U, 10 U

Width: 4 TE, 6 TE, 8 TE, 10, 12 TE, 14 TE, 20 TE, 21 TE, 40 TE, 42 TE, 84 TE

Features: the use of aluminium magnesium alloy profile production, can install electromagnetic shielding shell fragments,
can deserve to choose the model handle, and help pull device, panel fasteners, PCB stents (economic), exterior is available at any size.

Surface treatment: chromium acid passivation/anodic oxidation/coating/spray paint

Color: aluminum instinctive quality/black/other

 

           * process in accordance with customer’s requirements 

 
 
 

Plug-in box   【更多


 
  Plug-in box  

component put- in box, divided into type A and B type

 

Rising Subracks is specialized in electronic equipment and hardware support equipment manufacturing, such as 19″aluminum profile enlosures, sub rack, vice-chassis, cabbiage, caninet, frame, panel and so on. We are good at product customization. Our products meet various bus back panel installation requirements, including ATCA、VME/VME64x、PCI、CPCI、COTS

Internationally renowned chassis supplier:SCHROFF  RITTAL  VEROTEC  ELMA  PENTAIR  DANIELS ERVTEC  ATOS  SRS